How to set the LO frequency in your meter
LO settings
The LO settings of the meter MUST be the same as your LNB/F.  

How do you know the LO setting of your LNB/F?  

Most LNBFs have the LO freqency printed on the LNB/F label.  So, it's a simple matter of looking at the LNB/F label to get the frequency and they keying it into the meter.  If it's not on the LNB/F label, check the specifications of the LNB/F on the manufactures website or give them a call and ask them for this information.

Common LO setting are:
  • Universal = 9750 and 10600, used in European countries and others
  • 5150 = This is used for almost all C-Band LNB/Fs
  • 10750 = the US Standard that is commonly used in USA
  • 11250 = the most common one used for DSS (DirecTV and Dish Network)
Your meters installed settings are:
  • UNIVERSAL
  • 5150
  • 9750
  • 10750
  • Customised  (you can key in any LO frequency here)
How to set the LO in your meter
  1. Power on the meter
  2. from the MAIN MENU activate the Satellite Setting menu
  3. activate the Dish set-up menu
  4. highlight the LNB type selection 
  5. use the right and left arrows to change the LO setting
  6. click EXIT on the keypad
  7. and Save your settings, or Cancel them if you do not want to change the settings
Register Your Meter